If you are looking for a miter saw that can cut hardwood, you need to consider the Freud miter saw. This saw blade features an axial shear face grind, which gives a high-quality finish. Its 100 teeth and 6000 RPM give it exceptional functionality. Although it costs a bit more than other miter saw blades, it offers great functionality. Its price is higher than other best saw for crown molding, however.
Metabo C12RSH2S
The Hitachi C12RSH2S is a 12″ compound miter saw with good crosscutting capacity and sliding ability. Its 5-1/2-inch fence makes it easy to cut nested crown molding. It also comes with an adjustable guard to prevent the blade from jamming in the miter saw when cutting crown molding. Its easy-to-follow instructions and blade-braking system make it ideal for any DIY project.
This tool has a 15-amp motor for fast and efficient cuts. A large sliding fence raises the height of the cut surface by 5.125 inches to allow the flipping of bevels and miters. It has a miter scale with positive stops and indications. The bevel angle range is 0 to 48 degrees. Its compact slide system allows the saw head to glide easily along the fixed rails to support long materials without snagging.
This miter saw is less expensive than some other miter saws in this price range. However, it may be difficult to find a Metabo miter saw that comes with the Hitachi HPT brand. The rebranded model is known as the C12RSH2S. The price range varies from $300 to almost $600. Whether you plan to use the saw for cutting crown molding, trim, or bevel, the Metabo C12RSH2S is a solid choice.
Dewalt DWS709
The DWS709 is the lightest saw in its class, weighing only 31 pounds, and it comes with an eight-1/2-inch sliding blade that is perfect for cutting crown molding and miter and cross-cuts. This saw also cuts aluminum and plastic. There are four positive stops: 15, 22.5, and 31.6 degrees for bevel cuts, and a back fence that slides out of the way for bevel cuts. The saw also features an 8-inch blade with a splinter guard to help control tear-out.
The DWS709 features a 15-amp motor that delivers 3,800 RPM. The blades can cut up to 5 1/2-inch crown molding and four-1/2-inch base molding, and the saw can be nested for even greater capacity. This saw is backed by a three-year warranty. A good saw should be able to cut up to a half-inch thick crown molding, and the Dewalt DWS709 is the ideal tool for this job.
Craftsman sliding miter saw
If you’re in the market for a new sliding miter saw, consider the Craftsman model. Craftsman sliding miter saws are design to make the job of crown molding a breeze. With a specialized blade guard, these saws can cut through thick and difficult-to-cut materials. These saws are also very easy to use. To get started, simply follow the steps below:
Fine adjust features: The saw comes with a miter scale to help you cut a precise miter angle, and the side support tables pivot so you can easily adjust them for non-square environments. The tool also has a cutline indicator with an LED light that’s more accurate than a laser. A three-year limited warranty covers most parts and services, and an optional lifetime service agreement covers all blade replacement.
Crown molding: The Makita Miter Saw has the best capacity for cutting crown moulding, with a capacity of 6-5/8-inches in crown molding and 5 1/4-inches in baseboard vertical cuts. The saw’s 2-Steel Rail Sliding System features reduced footprint, allowing for flush operation against walls. The saw is lightweight and has a blade wrench and dust bag. It comes with a 90-day money-back guarantee, three-year limited warranty, and one-year free service.
Bosch GCM12SD
The Bosch GCM12SD is a 15-amp crown molding saw with a 12-inch blade and a cutting capacity of 14 inches horizontally and 6-1/2 inches vertically. It features a 40-inch extension base, 10 adjustable miter detents, two built-in 33.9@ stops, and a no-load speed of 3,800 rpm. The saw is quite heavy at 65 pounds, and its blade requires upgrading.
The Bosch GCM12SD is easy to use and has a powerful 15-amp motor capable of delivering 3,800 rpm. It also features a space-saving design and effective dust collection. As a sliding compound saw, it is capable of cutting thicker materials than other models. Many users have praised the saw’s accuracy and clean cut quality. The saw’s many features make it a reliable tool for any home improvement project, whether you’re building a deck, adding a new door, or restoring an old house.
The Bosch GCM12SD crown molding saw is easy to use, and has a zero-rear-clearance design so you can easily place it right against a wall. Its adjustable laser light is designed for greater accuracy and can be positioned on the cut for better precision. The saw’s positive stops help you make quick adjustments to the depth of cut, which is important for crown molding. It is also equip with a dust-collection system, which keeps the saw clean.
